To meet the growing challenges of our customers and their environments, Lutz has developed an efficient cost-effective flow meter, using existing measuring technology and state of the art electronics.

The flow meter can be combined with selected accessories to form a complete flow control system.

Type ST
for neutral liquids
such as water, heating oil, diesel and hydraulic fluid

Technical data - Type ST
Compatibility		consult Lutz chemical resistance table	Order No. without relay mdule 0212-101 Order No. with relay mdule 0212-131 Type ST/RM
Flow volume	GPM	min. 2.6 – max. 31.7
Temperature	°F	140
Viscosity	cps	2.000
Operating pressure	PSI	58
Accuracy		+/- 1% standard < 1% with adjustment to application conditions
Inlet port		2" male thread to fit connector with union nut
Outlet port		1 1/4" male thread
LCD display		19 mm (0.75") character height, 6-digit display , individual and total volume reset possible
Materials Housing Measuring chamber Seals Magnet
		PPO
		PPO/PPS
		FPM
		BaFe / PA / stainless steel 1.4401
Enclosure	IP 54	IP 54
Weight (without RM)	lbs	2.2
* Depending on use ** Special materials on request General information to the chemical resistance of the different flow meters you will find in our chemical resistance table.

Type SL
for aggressive acids and caustic solutions
such as hydrocloric acid, sulphuric acid and caustic

Technical data - Type SL
Compatibility		consult Lutz chemical resistance table	Order No. without relay mdule 0212-201 Order No. with relay mdule 0212-231 Type SL/RM
Flow volume	GPM	min. 2.6 – max. 31.7
Temperature	°F	140
Viscosity	cps	2.000
Operating pressure	PSI	58
Accuracy		+/- 1% standard < 1% with adjustment to application conditions
Inlet port		2" male thread to fit connector with union nut
Outlet port		1 1/4" male thread
LCD display		19 mm (0.75") character height, 6-digit display , individual and total volume reset possible
Materials Housing Measuring chamber Seals Magnet
		PPO
		PPO/PPS
		FPM
		PPS encapsulated
Enclosure	IP 54	IP 54
Weight (without RM)	lbs	2.2
* Depending on use ** Special materials on request General information to the chemical resistance of the different flow meters you will find in our chemical resistance table.

Type LM
for highly flammable solvents
such as ethanol, petrol, isopropanol, kerosene

Technical data - Type LM (Ex)
Compatibility		consult Lutz chemical resistance table	Order No.
Flow volume	GPM	min. 2.6 – max. 31.7	0212-302
Temperature	°F	140
Viscosity	cps	2.000
Operating pressure	PSI	58
Accuracy		+/- 1% standard < 1% with adjustment to application conditions
Inlet port		2" male thread to fit connector with union nut
Outlet port		1 1/4" male thread
LCD display		19 mm (0.75") character height, 6-digit display , individual and total volume reset possible
Materials Housing Measuring chamber Seals Magnet
		PPS
		LCP
		FEP
		BaFe / MS / stainless steel 1.4401
Enclosure operating unit	Ex-BE1	EEx ib IIA T4
Enclosure		IP 54
Weight	lbs	2.2
* Depending on use ** Special materials on request General information to the chemical resistance of the different flow meters you will find in our chemical resistance table.

Type UN
for highly flammable and aggressive media
such as formic acid, acetic acid, tetrahydrofuran

Technical data - Type UN (Ex)
Compatibility		consult Lutz chemical resistance table	Order No.
Flow volume	GPM	min. 2.6 – max. 31.7	0212-402
Temperature	°F	140
Viscosity	cps	2.000
Operating pressure	PSI	58
Accuracy		+/- 1% standard < 1% with adjustment to application conditions
Inlet port		2" male thread to fit connector with union nut
Outlet port		1 1/4" male thread
LCD display		19 mm (0.75") character height, 6-digit display , individual and total volume reset possible
Materials Housing Measuring chamber Seals Magnet
		PPS
		LCP
		FEP
		PPS encapsulated
Enclosure operating unit	Ex-BE1	EEx ib IIA T4
Enclosure		IP 54
Weight	lbs	2.2
* Depending on use ** Special materials on request General information to the chemical resistance of the different flow meters you will find in our chemical resistance table.

Type VA I
for highly flammable and aggressive media
such as ether, styrene, xylene, nitric acid, tetrahydrofuran

Technical data - Type VA I
Compatibility		consult Lutz chemical resistance table	Order No. without relay mdule 0212-501 Order No. with relay mdule 0212-531 Type VA I/RM
Flow volume	GPM	min. 2.6 – max. 26.4
Temperature	°F	176
Viscosity	cps	4.000
Operating pressure	PSI	145
Accuracy		+/- 1%
Inlet port		1 1/4" male thread
Outlet port		1 1/4" male thread
LCD display		19 mm (0.75") character height, 6-digit display , individual and total volume reset possible
Materials Housing Measuring chamber Seals Magnet
		stainless steel (1.4581)**
		stainless steel / ETFE / ETFE
		FEP
		ETFE encapsulated
Enclosure	IP 54	IP 54
Weight (without RM)	lbs	7.9
* Depending on use ** Special materials on request General information to the chemical resistance of the different flow meters you will find in our chemical resistance table.

 

Technical data - Type VA I (Ex)
Compatibility		consult Lutz chemical resistance table	Order No.
Flow volume	GPM	min. 2.6 – max. 26.4	0212-502
Temperature	°F	176
Viscosity	cps	4.000
Operating pressure	PSI	145
Accuracy		+/- 1%
Inlet port		1 1/4" male thread
Outlet port		1 1/4" male thread
LCD display		19 mm (0.75") character height, 6-digit display , individual and total volume reset possible
Materials Housing Measuring chamber Seals Magnet
		stainless steel (1.4581)**
		stainless steel / ETFE / ETFE
		FEP
		ETFE encapsulated
Enclosure operating unit	Ex-BE1	EEx ib IIA T4
Enclosure		IP 54
Weight	lbs	7.9
* Depending on use ** Special materials on request General information to the chemical resistance of the different flow meters you will find in our chemical resistance table.

One system for all areas of application
Whether sub totals need to be tracked or continuous tracking is required, whether mobile or stationary, the modular structure guarantees your flexibility and safety.